Copper Connectors
Copper Cable Lug
T cable lug manufactured from electrolytic copper with a tinplated finish to improve electrical contact. Incorporates inspection hole to check the correct cable positioning.
According to IEC 61238-1-3 standard.
Copper Butt-Connector
M copper butt-connector manufactured from electrolytic copper with a tinplated finish to improve electrical contact.
Incorporates inspection hole to check the correct cable positioning.
According to IEC 61238-1-3 standard.
Cord End Terminals
Cord End Terminal
APF cord end terminal manufactured from electrolytic copper capillary tube with a tinplated finish to improve electrical contact. The insulating part is made of polypropilene (PP).
Twin Cord End Terminal
APF/D cord end terminal manufactured from electrolytic copper capillary tube with a tinplated finish to improve electrical contact. The insulating part is made of polypropilene (PP). It is designed for electrical panel boards.
Insulated Terminals
Insulated Ring Terminal
AT terminal manufactured from electrolytic copper strap with PVC insulation.
Insulated Fork Terminal
AU terminal manufactured from electrolytic copper strap with PVC insulation.
Insulated Female Connector
AFH terminal manufactured from electrolytic copper strap with PVC insulation. Incorporates an inside fitting which provides a better security to stand possible mechanical vibrations.
Insulated Butt Connector
AML butt-connector manufactured from electrolytic copper strap with PVC insulation. Incorporates an inside fitting which provides a better security to stand possible mechanical vibrations.
Fully Insulated Female Connector
AFH/A connector manufactured from electrolytic copper strap with PVC insulation. Incorporates an inside fitting which provides a better security to stand possible mechanical vibrations.
Solar Connection
Connections for photovoltaic cables
MC4 Type Connector
MC4 type connectors, male and female: ensure a good connection and water tightness between the wiring terminations and the various elements that make up a photovoltaic installation.
- SCF/C-1000V for cross-sections of between 2.5 and 6 mm².
- SCF/C-1500V-A for cross-sections of between 2.5 and 6 mm².
MC4 Type Fuse Holder
MC4 type fuse holder for 1500V.
- Integrated, watertight 20 A fuse in MC4 connector.
- Fuse dimensions: 10x85 mm.
- Possibility of changing fuse (from 10 A to 50 A)
Cable Cutters
380 SF-21
For copper and aluminum cables up to 16 mm².
380 SF-30
For copper and aluminum cables up to 35 mm².
380 SF-31
For copper and aluminum cables up to 55 mm².
380 SF-20
For copper and aluminum cables up to ∅38 mm.
Crimping Tools For Non Insulated Terminals
385 SF-7
For copper terminals and thin-wall tubular aluminum from 10 to 95 mm².
Section adjustment by screw.
385 SF-17
For tubular copper terminals from 6 to 50 mm².
Section adjustment by revolver system.
Hexagonal compression.
385 SF-37
For tubular copper terminals from 6 to 120 mm².
Section adjustment by revolver system.
Hexagonal compression.
385 SF-8
For cable lugs from 1.5 to 16 mm².
Punching compression.
Crimping Tools For Cord End Terminals
390 SF-42
For cord end terminals from 0.5 to 6 mm².
Compression system by squared diaphragm.
390 SF-9
For cord end terminals from 0.5 to 2.5 mm².
Compression system by spring.
390 SF-6
For cord end terminals from 0.5 to 16 mm².
Compression system by spring.
390 SF-10
For cord end terminals from 0.75 to 10 mm².
Compression using ratchet mechanism.
390 SF-35
For cord end terminals from 16 to 35 mm².
Compression using ratchet mechanism.
Crimping Tools For Insulated Terminals
395 SF-16
For insulated terminals from 1.5 to 6 mm².
Compression using ratchet mechanism.
Crimping Tools For Solar Connectors
385 SF-MC4
Crimping tool for solar connectors to 2.5-6 mm² cables for photovoltaic installations.
Our Partners
